I really think this is minor but here goes


1 reply to this topic
  • chadster54321

Posted October 23, 2013 - 12:12 PM

#1

Alright got a buddy with a yz 450f 2004. He says the shifter will stick shifting down or up sometimes he already replaced everything except this assembly attached below the shifter. When you shift to final gear it wont go into gear completely and go in and out. Shift forks have been replaced. Any ideas?

Attached Thumbnails

  • 1382559109586.jpg


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted October 23, 2013 - 01:27 PM

#2

Yup.  The lugs on the sides of the 3rd and 4th pinions (the gears on the main shaft) are rounded off and will not hold the drive load when engaged.  The fact that it skips in and out means it has probably already bent the main shaft shift fork.







Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.