Wheel Bearings

No replies to this topic
  • Slow and Jerky

Posted October 21, 2013 - 05:37 PM


I need to replace the front rear wheel bearings (and seals) on my 06 yz450. It has aftermarket hubs so I was looking online to buy the bearings by using the part numbers. The existing bearings on the rear have a part number 6205rs and the front bearings are 60/282rs. I have found lots of bearings online with those part numbers and the hole diameter measurements all sound correct. But the thicknesses seems to be off by a fair amount. On the rear bearings all the online suppliers show their bearings to be 15mm thick, but when I measure the thickness of mine (the ID) I get approximately 11mm. I am getting a similar difference for the fronts. I haven't pulled the bearing out of the hubs yet, but I'm wondering if I'm missing something?



Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.