Jump to content

GYTR MX Flywheel. pros/ cons ,advice ?


Recommended Posts

So im thinking about installing a heavier flywheel, first question is how is the bike affected in practical terms?Im no racer just out to have fun maybe C class skills on a good day.

 

Im all about being as smooth as possible riding a 450 at 125lb thats harder than it sounds. Dont get me wrong i love my 450 just wondering if smoothing out the power will help in my situation.

 

 Secondley, ive watched/ read up on the install and it seems pretty simple. Ill buy a flywheel puller but is there anything else ill need any tips or words of advice?

 

These guys seem to make it look easy enough.

 

http://www.youtube.com/watch?v=RTNIO2UM74w

http://www.yamahamotorsports.com/sport/accessories/acscitemdetail/5/348/1218/5375/2006/all/5207/0/detail.aspx

 

 

Link to comment
Share on other sites

Just put the gytr 9 oz on my yz450f. Experienced less stalling in tighter, slower trails. Bike is less jerky. Seemed like hills were easier too. Not sure about how it affects the track experience but great mod for the woods. Im not a big person either, anything that makes it easier to ride is a plus.

It was easy to install. Mine came with a new gasket.

  • Like 1
Link to comment
Share on other sites

I put the GYTR "Performance" flywheel on my '06 some years ago.  It's not the "offroad" flywheel, which is the heavier one.  This is the one that supposedly Chad Reed was using on his racebike at some Supercross venues for better traction out of the corners.

 

Anywho,  my bike "felt" like it gained 10 hp from the flywheel (Disclaimer:  Flywheels DO NOT add any HP to a motor.)  Fact is, with the tire hooking up better, the acceleration was so very much improved, it felt like it had more power.

 

I did it because I was running some tighter trails at the time and was spending a lot of time on my clutch trying to get the motocross beast through them.  The flywheel definitely helped.

 

Back to the present, because my boy (9 y.o.) is racing motocross, I ride a lot of tracks these days.  I find that the flywheel helps a bunch here too especially when the track is a bit slick or for basic drive out of a turn (just like Chad Reed did I guess).  I ride the Dunes as well.  I like it there because if I have to, I can lug the bike a bit more and the flywheel helps me pull out of it.

 

All Pros, No Cons.

 

Dave

Link to comment
Share on other sites

(Disclaimer:  Flywheels DO NOT add any HP to a motor.)

 

The truth is that they actually do, but only in the very low RPM range.  When the engine is loaded at low speeds it is slowed by each of its own compression strokes and has to recover that out of the next successive power stroke.  If more rotating mass is added, the inertia remaining from the previous stroke reduces the loss, and there is a small net gain in output in the lower part of the functional speed range.  If the weight added is not so great that it becomes an impediment to engine acceleration, you come out ahead.

Link to comment
Share on other sites

Agreed with all the above. Installed the Stealthy 9oz weight on my 12 and it the bike very tractable in technical conditions and improved the handling (front end felt more planted when on the gas). No regrets for off road riding in Georgia (hard dry dusty clay when dry, slippery, snotty when wet) and easy to install.

Link to comment
Share on other sites

Agreed with all the above. Installed the Stealthy 9oz weight on my 12 and it the bike very tractable in technical conditions and improved the handling (front end felt more planted when on the gas). No regrets for off road riding in Georgia (hard dry dusty clay when dry, slippery, snotty when wet) and easy to install.

Wow I didn't know that heavy of a FW was available for the FI Yamaha 450's engines!

I added the GYT-R 4.3 oz extra weight FW. That was nothing but goodness for my '10 450F.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...