need a new headlight

1 reply to this topic
  • hourout

Posted December 28, 2003 - 08:41 AM


i have the stock head light on my xr 650r and a wer stearing stablizer. because of clearance isues with the wer i had to cut the bottom of the head light out removing the lower supports. :) so now the top straps are there and i ty rapped the bottom to the fork tubes. while riding it will slowly slide down into the wer linkage. :D any advice on an aftermarket head light i could just install that would fix this isue. :D thanks in advance :D

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • BWB63

Posted December 28, 2003 - 08:55 AM


The Acerbis head light asembly dosen't use the mounting hole. It uses four straps. There is a lot of clearance at the bottom for your dampener. If you belong to the XR650r Yahoo group here is a picture of mine.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.