02 WR426 Exhaust Head Pipe Titanium???

[justanotherday]

Is the stock head pipe for the 02 WR 426 Titanium. I'm needing to weld a o2 sensor bung to it but the welding shop has an issue if it's titanium.

[WRSTEVE]

Nope,

more like Aluminum foil

I had to have my head pipe welded once, just make sure you use low heat. ?

[Garry_on_a_426]

Is the stock head pipe for the 02 WR 426 Titanium. I'm needing to weld a o2 sensor bung to it but the welding shop has an issue if it's titanium.

Why are you putting an o2 sensor on it?

[justanotherday]

I have a Wide Band o2 Sensor that I will use for jetting all my bikes and quads and whatever else I may purchase in the future ... long story if you do a search on this topic ... Wide band vs Narrow band and so on.

I'm hoping to ease the pain of jetting or just figure out what works and what doesn't. Might be a dead end or it might turn out to be a great little project.

[Rip Wheeler]

I have a Wide Band o2 Sensor that I will use for jetting all my bikes and quads and whatever else I may purchase in the future ... long story if you do a search on this topic ... Wide band vs Narrow band and so on.

I'm hoping to ease the pain of jetting or just figure out what works and what doesn't. Might be a dead end or it might turn out to be a great little project.

Hey, after you've done all the leg work, report back with your results so we can just install the jets. ?