99' wr400 hot start



No replies to this topic
  • siebe

Posted July 26, 2013 - 03:41 AM

#1

Hi,
New to the forum, but have been looking at other discussions for a few months, you guys seem to know what your talking about:) I'm I have been slowly rebuilding a 99 model wr400 and have found the answers to all questions on this site but one. The previous owner took the hot start button off for some reason and I'm not too sure how It goes back on. I know where it mounts to the frame and I know one side goes to the air box but does the other side go directly to the barrel or to that pump thing on the side of the carby first? I'll try to upload photos of what I have. Any help would be appreciated:)
the carby DSC_00481.jpg
the hot start botton/switch DSC_00491.jpg
where the air enters the chamber DSC_00501.jpg
there the button mounts to the chassis DSC_00531.jpg

Edited by siebe, July 28, 2013 - 02:00 PM.





 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.