Cr250 piston and bore size


4 replies to this topic
  • and-why958

Posted June 19, 2013 - 07:02 PM

#1

Has there been any changes in bore and piston size from 1991 to 2007? I was wondering if an 01 cr250 piston would fit in my 91 cr 250? I measured with a caliper but its not accurate to read 66.4 etc

  • Byron909

Posted June 19, 2013 - 07:52 PM

#2

86-96
97-01
02-04
05-07
Interchange years, pretty sure that's correct.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • JDubya381

Posted June 19, 2013 - 09:50 PM

#3

86-96
97-01
02-04
05-07
Interchange years, pretty sure that's correct.


That looks pretty right to me, I'm not as positive on the 86-96 number, but I don't know much of anything about those bikes. Hard to believe big red didn't have an engine redesign that incorporated a change in bore diameter for a whole decade lol. But then there's the last HPP engine from 97-01, and the first case reed engine with the flat top piston, followed by the domed piston on the 05-07

  • Byron909

Posted June 20, 2013 - 04:28 AM

#4

Actually, since 86 the bore has been 66.4
Think stroke has Been the same since 81.

  • and-why958

Posted June 20, 2013 - 10:58 AM

#5

Awesome thanks fellas





Related Content

Forums
Photo

2007 CR250 IDLE AND LOW RPM PROBLEMS by Speeddemon73


Dirt Bike   Make / Model Specific   Honda   Honda 2-Stroke
  • Hot  33 replies
Forums
Photo

Restoration CR125 2003 - From Chile by McGrau


Dirt Bike   Make / Model Specific   Honda   Honda 2-Stroke
  • Hot  39 replies
Forums
Photo

1999 CR125R Choke installation? by josephduckworth


Dirt Bike   Make / Model Specific   Honda   Honda 2-Stroke
  • 1 reply
Forums
Photo

How can I determine if a 2002 CR250 motor will fit, with slight mods, into a 1995 CR250 frame? by 5th gear tapped wide


Dirt Bike   Make / Model Specific   Honda   Honda 2-Stroke
  • 3 replies
Forums
Photo

My first bike... 01 Cr80 by dylancr80


Dirt Bike   Make / Model Specific   Honda   Honda 2-Stroke
  • 4 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.