Can someone tell me what this part is


6 replies to this topic
  • Laserau77

Posted May 20, 2013 - 05:15 PM

#1

Hi Guys,
I am parting out my WR 400 99' model and are having trouble identifying This part. I think it is the voltage rectifier. I looked on ebay and the net and couldnt see one the same as this.
Can someone please confirm for me.
ImageUploadedByThumper Talk1369098927.986052.jpg

Attached Thumbnails

  • ImageUploadedByThumper Talk1369098858.571392.jpg


  • D-rek07

Posted May 21, 2013 - 01:08 PM

#2

It is either a voltage rectifier or voltage regulator. Like this one
http://www.ebay.co.u...r-/121099171243

Edited by D-rek07, May 21, 2013 - 01:13 PM.


  • Laserau77

Posted May 23, 2013 - 04:41 AM

#3

Thanks Drek-07. I thought it was the regulator but couldn't find a picture anywhere. All the newer bikes have a heatsink on them so they look different.
Thanks for helping out.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • D-rek07

Posted May 23, 2013 - 10:29 AM

#4

Thanks Drek-07. I thought it was the regulator but couldn't find a picture anywhere. All the newer bikes have a heatsink on them so they look different.
Thanks for helping out.

No problem. We're here to help

  • Do I Care?

Posted May 24, 2013 - 11:52 PM

#5

Definitely regulator/ resistor lol. Any other troubles- I have a 1999 WR400 siting in pieces as I write this.

  • Laserau77

Posted May 27, 2013 - 09:35 PM

#6

Definitely regulator/ resistor lol. Any other troubles- I have a 1999 WR400 siting in pieces as I write this.

Hi Barra8,
Thanks for the input it is really appreciated.
If you dont mind I would like to ask you a quick question.
I have sold the Neutral switch (sits down next to the gear shift lever and front sprocket) on ebay and tried to take it off last night but it seems stuck. I was in a hurry so didn't try any more but was wondering if you know if there is a trick to it?
It may just be held on with silastic but didn't want to pull to hard incase it broke. Have you had any experience with these before?
Cheers,
Andrew

  • Do I Care?

Posted May 28, 2013 - 12:32 AM

#7

Hi Barra8,
Thanks for the input it is really appreciated.
If you dont mind I would like to ask you a quick question.
I have sold the Neutral switch (sits down next to the gear shift lever and front sprocket) on ebay and tried to take it off last night but it seems stuck. I was in a hurry so didn't try any more but was wondering if you know if there is a trick to it?
It may just be held on with silastic but didn't want to pull to hard incase it broke. Have you had any experience with these before?
Cheers,
Andrew


The O-ring is keeping it held in, use vice or multigrips to carefully clasp it using a rag to protect it. Once clasped gently wiggle it out. BE VERY CAREFUL, it breaks easy.

I am guessing that you removed the two retaining screws?

Edited by Barra8, May 28, 2013 - 12:51 AM.





 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.