Jump to content

Oil leak from clutch actuator


Recommended Posts

Hello!

I have a Yamaha yz450f '07.

I found oil leak from the clutch actuator? Oil seal is damaged? It happened after a day in realy muddy track..

How can i change the seal?

I understand that i need to remove actuator, but to do that, do i need to remove clutch basket or is it some screw somwhere?

Sajugs.GIF

Link to comment
Share on other sites

If I remember correctly, all you have to remove is the pressure plate, the push rods and ball bearing. Then you should be able to lift the actuator up to replace the seal.

Correct, you need to pull the pressure plate and the pushrod. Then you can remove the actuator arm. The seal is held in with a snap ring so you will have to remove that to get the seal on. It's not too hard to fix.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...