Clutch help pretty please

2 replies to this topic
  • Stayinthirsty

Posted April 26, 2013 - 08:11 AM


i asked nicely.
ok so had a rekluse installed in my 09 yz450 decided to swap it into my 08wr450. well the rekluse works great in the wr but when i put the clutch from the wr into the yz i have way to much slack in the cable/lever. so i rechecked everything 7 steels/8frictions, throw out and ball are correct. everything looks me at least. i have another cable im going to try but im not sure if that is wasting time or not. ive tried adjusting cable at all points but there is still way to much slack.

i didnt touch the pushrod or take anything out deeper than the throw out.

any help would be appreciated. ill take pics later

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted April 26, 2013 - 08:15 AM


You're sure you didn't loose the ball that runs between the outer pushrod/throwout assembly and the inner rod? Since there's a socket in the outer rod, the ball likes to stick to it when you pull the outer rod out. Then, when you're not looking it rolls away somewhere.

  • Stayinthirsty

Posted April 26, 2013 - 11:55 AM


yeah that was the first thing i checked when i broke back into it. thanks for your response, any other things i should check?

Related Content


05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.