upper clamp

2 replies to this topic
  • etuke

Posted April 09, 2013 - 06:55 AM


was looking for an upper triple clamp from an 09 to put on my 07 yz450 to get the extra forward bar mounts but before I buy a set I just wanted to make sure they will fit my bike.Does anybody know if they are interchangeable?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted April 09, 2013 - 08:12 AM


It should fit, as far as I know.

If you use the '07 lower, it will be simpler. It should just drop right on. The stem was shortened 5mm in '08, and while the older, longer stems will work just fine on the newer bikes, you'd need to swap stems to use the '09 on an '07. But since the offset and all that is all the same, there's no point in making the effort unless there's some other compelling reason to use the newer one.

  • etuke

Posted April 09, 2013 - 09:59 AM


just wanting the top to get different bar adjustments.

Related Content


2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.