wr part number recognition

2 replies to this topic
  • sas1975

Posted April 02, 2013 - 05:39 AM


Hi. Can any one clarify how to identify the year from a part number or if it is even possible. Do year 2000 parts start with 5GS and 2001-2002 5NG ? Would that be correct or does it not correspond to the year.

I'm after a wr426 or a year 2000 wr400 stator as I believe these have the most wattage, but I'm struggling to tell the difference between the manufacture years.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • GuyGraham

Posted April 02, 2013 - 06:45 AM


Bespoke parts begin with the 3 digit model code, but if its a common part like a bearing or a bolt that is used on other bikes then it'll have a generic code

WR400 2000 stator 5NG-85560-01-00
WR426 2001 stator 5NG-85560-01-00
WR426 2002 stator 5NG-85560-50-00

Edited by GuyGraham, April 02, 2013 - 06:49 AM.

  • sas1975

Posted April 02, 2013 - 07:30 AM


Hi GuyGraham. Many thanks for your reply. I was sold a stator with the number starting 5GS. They claimed it was the wr426 stator but I guess not from the number. The more powerful stators seem pretty hard to get hold of! Will just have to keep looking.
Thanks again


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.