Fork height after installing PC link

No replies to this topic
  • mxstate

Posted April 01, 2013 - 09:00 AM



I would like to get some feedback on the following:
(2011 YZF ) I just installed the PC link in the rear and wonder if I should re-adjust the fork height?
Currently running 5 mm above the clamp

I rode last WE and it seemed to me that the rear was pushing more on the fork than before.
track conditions were so-so and I know the bike is sensitive to set up
I just got this bike and haven't got a chance too put lot of hours

I am on stock springs with clickers not far away from stock. 105 mm sag


Related Content


Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.