Am I missing a dowel?

1 reply to this topic
  • coyo

Posted March 16, 2013 - 12:19 PM


I recently had to remove the right case of my 03 WR450F to repair a snapped bolt. Since then I've had a slow oil leak from the oil line on the right side. I just replace the o-ring but there's no change in the leak. In looking at the fiche, it indicates TWO dowels and TWO o-rings, both with the same part #'s but indicated by different numbers on the fiche... am I missing something here?


The parts in question are #'s 20 & 19... but then there looks to be duplication in #'s 6 & 5.

Thanks in advance.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MANIAC998

Posted March 17, 2013 - 02:49 AM


My assumption is that the microfiche is wrong. There would be no need to have two Dowels/o-rings in that one location.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.