XR650R Carb on a XR650L



258 replies to this topic
  • qadsan

Posted December 01, 2003 - 03:38 PM

#21

The Edelbrock XR650L carb for $299 on Ebay is NOT a pumper carb. The picture of the carb in that listing is actually the XR650R pumper carb, but that's not the carb you'll get. The Edelbrock XR650L carb looks just like this, but does not come with an accelerator pump. You can however buy an Edelbrock XR650L 'pumper' carb from Barnums whose been doing this for sometime. Rob Barnum spent years doing R&D work for Edelbrock on various products and knows this carb inside & out along with building XR's.

That Mikuni that Dutch referred to looks like a good buy and is a great carb once its tuned.

  • exaresix

Posted December 01, 2003 - 08:47 PM

#22

Be forewarned that in switching from your CV carb to a slide carb, that you will have more problems if you ride at different altitudes. I live in Phoenix, which is close to sea level, but also ride extensively in the San Jauns in Colorado. I switched from a CV carb to a Mikuni slide on one of my ATVs, and while the slide carb worked great when jetted for Phoenix, the bike would not run in Ouray, Colorado. A CV carb is somewhat self-adjusting for altitude, without having to rejet. I went back to the CV carb and am much happier.

  • Dual_Dog

Posted December 06, 2003 - 07:22 AM

#23

Hey Dutch,

The bidding closed today for that XRL Mikuni Flat-slide & throttle set-up. I put a couple of bids in, but it got too rich for my blood. The whole kit went for about $180 on eBay.

Maybe next time.

  • Dutch

Posted December 06, 2003 - 07:59 AM

#24

Thats the thing about Ebay and auctions in general, when two people get bidding for something sometimes it goes for more than it's worth.
That was too much for that carb though. If you are willing to spend that much, buy a pumper.

  • pdxthumper

Posted March 10, 2008 - 08:32 AM

#25

Why do you need the throttle cables from an "R", do you also need the throttle assembly?

Thanks

  • martinfan30

Posted March 10, 2008 - 08:46 AM

#26

Most of these guys havent been on in years. I would just try the stock cables first, and see if they work.

  • resurrection

Posted March 10, 2008 - 01:56 PM

#27

I put an R on my L just this week.
80$ ebay
all went well used L cables but had to remove 1 to 2 inchs of cassing
It rocks go for it .

  • Denn10

Posted March 11, 2008 - 06:16 AM

#28

Most of these guys havent been on in years. I would just try the stock cables first, and see if they work.


LOL i was reading intently and looking at these names and saying "where did they come from" Then BAM saw the 5year old dates LOL. Not bad info but kinda out dated and maybe some other options that are better who knows LOL

  • Maroast

Posted March 11, 2008 - 04:15 PM

#29

I put an R on my L just this week.
80$ ebay
all went well used L cables but had to remove 1 to 2 inchs of cassing
It rocks go for it .


My brother just bought an "L" and when we uncork it, we're going to throw my old "R" carb on on his bike.....


What kind of jetting did you do? did you follow the XRR jetting guide? That carb was tuned pretty well for my bike....i had the 68s, 180 main, comp needle in 3rd...yadayadayada.

  • resurrection

Posted March 11, 2008 - 04:33 PM

#30

Ya know I didn't even check jet sizes I looked that all was well and put it on .

I think it's alittle fat on the top when I get a few more miles on it .I will know more .
Being a 650cc also I'm thinking it'll be close enough for starters.
Your numbers seem alittle high though maybe 165 to 175 Im thinking .

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • martinfan30

Posted March 11, 2008 - 04:51 PM

#31

My brother just bought an "L" and when we uncork it, we're going to throw my old "R" carb on on his bike.....


What kind of jetting did you do? did you follow the XRR jetting guide? That carb was tuned pretty well for my bike....i had the 68s, 180 main, comp needle in 3rd...yadayadayada.


If they are the same jets, those will be too rich for the L. In L terms, stock carb, they should be at 160-165 and 55-58 for sea level. The needle should work in the 3rd clip pos.

  • Maroast

Posted March 11, 2008 - 05:45 PM

#32

If they are the same jets, those will be too rich for the L. In L terms, stock carb, they should be at 160-165 and 55-58 for sea level. The needle should work in the 3rd clip pos.


yeah, we'll most likely drop the main quite a bit...i have a handful of mains ranging from 160-185....

But do you think the pilot will be ok (68s)? how do you know if you need to go up or down on the pilot? thanks a lot for the help.


on a bit of a side note, the power on his brand new corked-up L is pretty nice....it feels pretty peppy...and should really open up with a little bit of work...all in all great bike :thumbsup:

  • martinfan30

Posted March 11, 2008 - 07:39 PM

#33

yeah, we'll most likely drop the main quite a bit...i have a handful of mains ranging from 160-185....

But do you think the pilot will be ok (68s)? how do you know if you need to go up or down on the pilot? thanks a lot for the help.


on a bit of a side note, the power on his brand new corked-up L is pretty nice....it feels pretty peppy...and should really open up with a little bit of work...all in all great bike :thumbsup:


THis is the best explanation of how to find your correct pilot setting. A sticky in jetting by the great Eddie Sisneros...

http://www.thumperta...ad.php?t=327405

  • husky123

Posted March 12, 2008 - 10:32 AM

#34

I just put my R carb on the L. Literally just got back from the shed. I used a 160 main and 58 pilot. The pilot is a little lean (sea level, 55 degrees). I've got the fuel screw backed out to 3 1/2 so I'm going to try a 60 or 62 and we'll see if that dials it in better.

But I'll tell you what the power difference is nice. Better grunt.

  • swechilli

Posted March 22, 2008 - 09:58 AM

#35

husky123! When you talk about R carb is it the XR650r carb or the xr600r? Im putting a xr650r carb on a xr600r and Im fishing for input.. 640cc JE piston, K&N air, hotcam1. Can I go with the stock xr650r carb or do I have to change the jets??

Thanks swechilli

  • cleonard

Posted March 22, 2008 - 10:10 AM

#36

Either the 650R or 600R carb should work. The bike should start with the jetting that it had before. However, it will likely need a little tweaking for best performance.

  • husky123

Posted March 22, 2008 - 01:45 PM

#37

Yes I was talking about the 650R carb.

  • XR TANK

Posted April 07, 2008 - 05:25 PM

#38

I just scored a 650 R carb on ebay. $150 for the carb, throttle/cables, extra jets, and a few needles. Not sure what im gettin but im pumped to see if it will work on my built 650 L.

  • swechilli

Posted April 08, 2008 - 01:10 PM

#39

Would be great if you can tell us more after the test run.. Im doing the same swap but my bike is not ready and its always good with fresh input..

  • Kenzo

Posted April 12, 2008 - 04:49 PM

#40

just picked up XR650R carb off fleabay for $50 plus $11.10 for shipping...

...so the previous posts have jetting all over the place...any updates from someone who has it tuned?

...and will the L's jets fit this carb(same series)?

between a few i have laying around plus my buds i hope to have the jetting covered...

TIA,

Kenny





Related Content

Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 0 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.