2011 airbox removal

1 reply to this topic
  • mxstate

Posted March 07, 2013 - 03:34 PM


I am about to replace the complete airbox on my 2011 and would like to know how to reach the bottom clamp of the intake boot.
Do I have to remove the radiators?
I easily figured the upper portion (1 bolt by the steering stem and two at the lower side on the frame)
I have a brand new assembled airbox

Any tip?

As much as I love this bike (coming from a 2010 250 YZ), and being a Yamaha guy, I have to say that the design of this airbox is a total nonsense.
So many pieces and tiny areas, grooves where dirt can build up over time does not make any sense
This bike had one owner before and he did maintain it correctly but I am super picky when it's about intake cleanliness on a thumper

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • asnyder2

Posted March 07, 2013 - 05:20 PM


I used an allen bit in a quarter inch bit driver with long extension. Left rads on

Related Content



Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.