2006 wr450 rebuild

2 replies to this topic
  • chunkynz

Posted February 19, 2013 - 06:12 PM


hey guys need some advice on how to go about rebuilding my bike, i can get a wossner kit for the top end and also a race ready crank for the bottom end, check my links and let me know what yas all think, any help would be fantastic!
also, the cylinder has been marked so its either recoating or a new cylinder works cylinder, are these any good, i have heard of metal shavings ending up in the oil and cracks appearing.
if anyone has any other ideas and know of some good brands, please let me know!

Edited by chunkynz, February 19, 2013 - 06:53 PM.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Just_a_trail_rider

Posted February 19, 2013 - 06:19 PM


These seem good to me...

Are you going to rebuild the crank yourself? I would have bought a new crank already assembled.

Did you want a high compression piston?

Don't forget the crank bearings and bottom end gasket kit.

  • chunkynz

Posted February 19, 2013 - 06:22 PM


yea that site has all the bearings and crank that i need, also need the cylinder recoated.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.