[mikesbaron]

Need someone who has a BRP submount on their XRR:
http://crfsonly.com/reviews/BRP/SUB-mount-review/sub-1.jpg
I need to know what size the 2 large mounting bolts are? And then need to know the distance from the center of the two large mounting holes/bolts.

The reason being, I bought an XRR that has aftermarket upper triple and independent mounts (see below). I want to add the BRP submount and am hoping my bar clamp holes will line up or be very close to the BRP measurements so I can save on not having to buy the submount and upper triple clamp.
http://i32.photobucket.com/albums/d28/Schultzee/urls/clamps-1.jpg

[XRandWRRider]

Pretty sure the bolts are M12's with 17mm head size, 100mm spacing and 14mm forward offset from the steering stem hole. See my write-up HERE (http://www.thumpertalk.com/forum/showthread.php?t=745496&highlight=) where I put an XRR S.U.B. mount on with my CR fork conversion.