PDA




  1. spark plug colour
  2. DRZ400SM Runs on choke only.
  3. dynojet question
  4. Carb needle remover tool ???
  5. cr 125 jetting recomendations
  6. 07 YZ450 jetting help
  7. 07 Drz 400 fcr 39 with powernow system..
  8. Stalling off idle?
  9. 2005 YZ450F Starting and idling issues
  10. FCR DRZ400S Jetting Check
  11. TMX 38 Needle
  12. mikuni CV33 vs Keihin CR39
  13. Yz426Jetting?
  14. Which Pipe To Get.....?
  15. Compression change jetting?
  16. Another Jetting Question: 2003 Cr 125
  17. 07 KX250 scenario
  18. 94' XT 600E Cold Starting Problem
  19. 2003 yz250f problem
  20. Main jet size?
  21. klx300 jetting
  22. Starting problems
  23. 2008 Xr650l
  24. crf150F 2006 w/ Mik 28MM Flatslide
  25. Kx 125 '03 jetting
  26. yz450f poping under consistant mid throttle ?
  27. edilbrock carb mystery issue
  28. 07 Wr250f
  29. 2003 KLX400R Carb Issues
  30. DR350 CV Carb - Stalling off idle
  31. ı need help before jetting and mod
  32. How should the 3P connector for the sensor be disconnected?
  33. XR 600 bog issue
  34. Lack Of Power At 3/4 To Full Throtle
  35. Help! lean machine!
  36. XR400 carb needle removal.
  37. hesitation issue on a 2004 250X please help quick!!!
  38. 06 KTM 450xc
  39. For Ed:after market Reed valves for cr500?
  40. Hot Start Removal
  41. Help, carb issues?
  42. FCR39 Throttle Slide Clearance/Gap
  43. 2006 TE250 Jetting Specs
  44. jet holder P97A
  45. petrol not making it into carby
  46. 97 CR250 jetting q's
  47. power blades?
  48. Mikuni TM28 / 02' DR-Z 250 Fuel screw
  49. 05 yz144 ballpark help!?
  50. Rejetted-now stalling off idle
  51. Erratic/high idle when warm, hunting idle when cold
  52. Can I use K&N Filter Oil on foam filters?
  53. Carb swap to 38mm PWK Jetting help
  54. 2008 crf 250r jetting
  55. 2005 crf250r jetting
  56. Have new pipe
  57. 08 ktm 530excr HELP !!!!
  58. honda piliot jet in a yamha
  59. 2003 KX250 Ball park jetting????
  60. DR 250 idle problems




The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.

Copyright ©2000 - 2009, ThumperTalk®, Inc. - Terms of Use